位置:首頁 > 軟件介紹 > 繡花制版類 > 正文
wilcomES2006(威爾克姆2006) SP4的改進功能
Θ聯科繡花網[樂繡網]-繡花制版類資訊   

1.威爾克姆2006SP4 R2版比SP2啟動快了很多,在打開大花樣速度也比SP2要快,打版系統穩定很多.
2.威爾克姆2006 SP2在打開低版本花樣時識別出錯,WILCOM2006 SP4能正確識別。
3.wilcom2006 SP4在打版時,十字光標對齊網格線時,十字光標自動變成淺藍色,這樣會更人性化.
4。WILCOM 2006 SP2的打印的資料,縮放數字跟花樣名都靠在一起了,有的很難辨出花樣名,SP4改進顏色順序上面會以更大的字體來顯花樣名。

5.威爾克姆2006 SP4 R2的在打金片版時,下面可以顯示金片關閉,置片等相關信息。而SP2是不行的。

以下為官方的說明:

改善針經理裝載和運行速度
此前,兩個問題是有經驗的速度與針經理:加載時間的軟件,發送設計機器.與ES2006 SP4時,加載和運行速度已顯著改善.

Previously, the 'Use Saved Version' option didn’t work correctly when using user-refined letters with converted TrueType fonts. If the checkbox of 'Use Saved Version' was ticked, the user-refined letter was not applied, while if the checkbox was not ticked, the user-refined letter was applied. This problem has been rectified in ES2006 SP4.
改進的用戶,完善字母轉換TrueType字體
此前,'使用儲存的版本'選項沒有*噸正常使用時用戶與成品字母轉換 TrueType字體.如果選中的'使用儲存的版本,是價格,用戶完善信不適用,而如果復選框沒有打勾,用戶完善信適用

Previously, selecting and reshaping nodes on objects with a image beneath caused a reshape error. This problem has been rectified in ES2006 SP4.
改進的速度在增加亮片和/或改變片顏色
此前,增加片和/或改變顏色的金片亮片調色板太慢

Previously, ES tended to freeze at regular intervals when set to Japanese locale. This problem has been rectified in ES2006 SP4.
日本西凍結問題糾正
此前,胚胎往往凍結時,定期為日本地區

Previously, selecting and reshaping nodes on objects with a image beneath caused a reshape error. This problem has been rectified in ES2006 SP4.
改進的對象選擇和改變
此前,選擇和改變節點上的物體的形象造成了意想不到的下方錯誤

Previously, letters used when the lettering template was saved appeared on the screen when left-clicking the lettering tool and clicking the screen in a new designer window. This problem has been rectified in ES2006 SP4.
Affected templates should be resaved once the SP4 is installed. 
刻字模板問題的糾正
此前,信件時使用的字體保存模板出現在屏幕上時,左點擊文字工具,然后點擊屏幕在一個新的設計器窗口.此問題已得到糾正在ES2006 SP4的受影響的模板應該resaved一旦安裝SP4
 
Previously, edited Input C lines in reshaping mode disappeared when zooming in /out. They would reappear only after pressing Enter to accept changes. The problem didn’t occur with any other input methods – Complex Fill, Run, etc. The problem has been rectified in ES2006 SP4.
輸入C改造模式問題糾正
此前,編輯輸入C線改造模式消失時,縮放/退出.他們將再次出現只有在按Enter鍵接受變更.這個問題沒有*噸發生任何其他輸入方法每情結填補,運行等問題已得到糾正

Previously, applying Front-Back Shaping operations to certain overlapping Sequin Run and Input A objects after applying other shaping operations caused the Color-Object List to cease functioning properly – e.g. missing objects, additional objects appearing, unable to scroll down, etc. This problem has been rectified in ES2006 SP4.
彩色對象名單后,前后整形問題糾正
此前,采用前后形成一定的重疊業務運行和亮片輸入一個物體后,申請其他塑造行動造成彩色對象名單停止運作正常每例如缺少的對象,更多的物體出現,無法向下滾動,

Previously, there were sometimes problems with Photo Flash generating stitches correctly. These have been rectified in ES2006 SP4.
相機閃光燈縫代問題糾正
此前,有問題,有時相機閃光燈產生縫正確

Previously, color changes disappeared upon re-sizing selected objects after selecting all and then deselecting – i.e. by holding down the Ctrl key and left-clicking the lettering to be deselected. Color changes only become available when stitches are re-generated. If the first object is not lettering, the problem doesn't occur. This has been rectified in ES2006 SP4.
刻字物體顏色變化問題的糾正
此前,顏色變化消失后重新上漿后,所選對象,然后選擇所有取消每即按住Ctrl鍵和左邊的點擊刻字被取消.顏色變化不僅成為時,可用針重新生成.如果第一個對象是沒有刻字,沒有發生問題
 
With previous releases, customers have reported that ES crashes while using the Color-Object list while editing.
This has been rectified in ES2006 SP4.
彩色對象名單崩潰問題糾正
與以前的版本中,客戶報告說,胚胎干崩潰而使用彩色對象名單,同時編輯

泰國字體轉換
泰語面臨的挑戰提供了獨特的自動字體轉換.文字,寫從左至右,由44個輔音,33個元音,4音調和其他符號.阿輔音的位置為中心的文字和元音的位置頂端/底部或右/左的輔音.元音的表示組合15元音和輔音字母.在以前的版本,輔音字母和元音字母和符號位于中線轉換,形成良好的字樣.然而,輔音和聲調符號沒有中心線不能轉換

提高設計工作流與ES2006 SP4中,有一些改進了設計工作.這些措施包括: 
  提高速度時,載入中搜索對話框. 
  提高速度時,點擊客戶領域的設計和設計要求屬性對話框. 
  改善業績的啟動時不進行排序到位. 
  在客戶選擇對話框A和更多*按鈕已加入的底部時,客戶名單有200多個客戶在系統中.單擊此負載下一個200個客戶名單. 
  現在所有的名單中逐頁每即與更多*按鈕出現底部的清單,如果人數項目超過200個.
  Improved speed when loading the Search dialog.
  Improved speed when clicking on the Customer field in Design and Design Request Properties dialogs.
  Improved performance on start-up when no sorting is in place.
  In the Customer Selection dialog a ‘More’ button has been added to the bottom of the customers list when
there are more than 200 customers in the system. Clicking this loads the next 200 customers to the list.
  All lists are now loaded page-by-page – i.e. the ‘More’ button appears at the bottom of a list if the number of
items exceeds 200.

 

來源:聯科繡花
以下花樣可直接上繡花機做貨:
樂繡(聯科)制衣刺繡網
欢乐捕鱼试玩